Description
Power Amplifier 5C-CA-4400
· Stereo Mode
v Respectively connect the left & right signal source with CH1 and CH2. The output terminals respectively connect with a speaker.
· Parallel Mode
v Respectively connect speaker with output terminal of each channel. The output volume of each channel is controlled by the volume knob at the front panel.
· Bridge Mode
v Connect the positive terminal of both channels to speakers. The output volume is controlled by CH1/CH3 volume knob at the front panel.
· LED display
· Thermal protection for overheat overload, short circuit, dc, soft start
· Ready situation, signal indication, clip indication
· Gain control channel 1, channel 2
· Balance XLR input CH1,CH2, input connection
Technical Specifications:
8 ohm stereo power |
1200Wx2 |
4 ohm stereo power |
1800Wx2 |
2 ohm stereo power |
2400Wx2 |
8 ohm bridge power |
3600W |
4 ohm bridge power |
4800W |
Frequency Response |
20Hz-20KHz±0.3dB |
THD+N |
<0.05%@8Ω 1KHz |
S/N Ratio |
>103dB |
Slew Ratio |
35V/μS |
Damping Factor |
>800 |
Crosstalk |
>70dB@8Ω 1KHz |
Input Sensitivity |
1.4V |
Input impedance(balance/unbalance) |
10KΩ/20KΩ |
Voltage gain(sensitivity:8ohm) |
38dB |
Output Circuitry |
Class H |
Cooling |
Air flow from front to rear |
Protection |
Soft Start, Dc, Short Circuit, Over Load, Clip Limit, Over Heat, Progressive Volume |
Product Dimensions (W*H*D) |
515*485*133(3U) |
Packing Dimensions (W*H*D) |
665*590*203 |
G.W(±5KG) |
42KG |
Power cord |
BS 1363 Standard AC110V/60HZ.±10% AC120V/60HZ.±10% |
USP:
· High performance
· Three modes of operation for ease of installation according to the need of event.
· Best suitable for live stage/DJ/studio/auditorium/worship.
· Thermal protection for overheat overload, short circuit, dc, soft start
Operation Manual