Description
Power Amplifier - 5C-CA-P7000
Features:
· Power ON/OFF switch with an Active indication LED Light
· TEMP indicator to indicate the rise in heat sink temperature
· Two types of input jacks(balanced XLR and balanced phone)
· Three types output jacks (Speakon, 5-way binding post, and phone)
· Each channel has an independent OFF/LOW CUT/SUBWOOFER Switch where low cut engages a high-pass filter, and subwoofer engages a low-pass filter. Adjusts the cutoff frequency from 25Hz to 150Hz.
· LED Clip, Signal and Protect indicators to indicate the distortion as well as auto-protecting and auto-balancing the sound inputs in speakers
· Volume control knobs for easily adjusting volume on each channel
· Forced air cooling for rapid, heat dissipation
· Low noise variable speed fans for proper cooling & performance maintenance
· FREQUENCY adjustment knob to adjust the cutoff frequency.
· ON/OFF switch to enhance speaker output and provide improved frequency response on speakers.
· INPUT jacks (Channels A, B) are provided for each channel.
· Modes of Operations
Ø STEREO mode:
Channels A and B operate independently (as with a conventional stereo amplifier). The Channel A input goes to the Channel A output jacks, and the Channel B input goes to the Channel B output jacks.
Ø PARALLEL mode
The Channel A input signal is output through both the Channel A and Channel B output jacks. The Channel B input jacks do not function. Channel A and B volumes can be independently adjusted.
Ø BRIDGE mode
The Channel A input signal is output from the BRIDGE output jacks. To adjust the volume, you must use the Channel A volume control knob.
· SPEAKER Jacks output connectors, 5-way binding post output jacks, Phone output jacks
· GND terminal mutes any distortion coming from the speaker, i.e., hum or noise
Technical Specifications:
Power Output Level (Rated Power) 1 kHz |
5C-CA-P7000 |
8Ω/Stereo Power/ |
600Wx2/1500Wx2 |
4Ω/Stereo Power |
900Wx2 |
2Ω/ |
1200Wx2 |
Freq. Response |
0dB,+0.5dB, -1dB F=20Hz-50kHz |
Damping Factor |
≥350 |
S/N Ratio |
104Db |
Indictors |
Power= x1(green) Protection= x1(Red) Temp= x1(Red) (heatsinktemp≥85°C Clip = x2(Red) Signal= x2(Green) |
Dimensions(WxHxD) |
(578x563x215)mm |
Weight |
23kg |
Sensitivity(Vol.max) Rated Power 8Ω |
+8 dBu |
USP:
· High performance
· Three modes of connection for ease of installation according to the need of event.
· Best suitable for live stage/DJ/studio/auditorium/worship.
· Clip, protect and signal indication on rear panel for proper protection of your system and easy installation.
· Grounding Terminal mutes any distortion coming from the speaker, i.e., hum or noise.
Operation Manual