Description
PA POWER AMPLIFIER -
5CORE® introduces 5C-CA-12(2X800 WATT)Power Amplifier with high-frequency response, impressive functioning, and remarkable sound output well engineered by experts that lets you have a precise and accurate knowledge of sound amplifications.
Description:
·
High amplification of audio signal
·
Complete SMT PCB’s are used
·
High power Toroidal Transformer
·
Low noise twin-tunnel cooling with back-to-front
air flow.
·
Easily compatible with all PA System
·
3-Ways Sensitivity Switches for Stereo, Bridged
and Parallel mode
·
Ground-lift switch & Front panel
circuit-breaker switch.
·
Option for controlling two frequencies
separately i.e. LF & HF.
·
Easy in installation & Low power consumption
Technical
Specification:
MODEL |
CA12 |
2Ω Stereo Power |
2x1600W |
4Ω Stereo Power |
2x1275W |
8Ω Stereo Power |
2x800W |
Bridge Power |
3200W (4Ω), 2550W (8Ω) |
THD+N |
<0.03% |
Slew Ratio |
40V/µS |
DA MPING Factor |
300 |
S/N Ratio |
>95dB |
Input sensitivity 14KG |
0.775V,1V,1.4V |
Input Imped (bal/unbal) CA2 |
20KΩ/10KΩ |
Protection 2x300W |
Overheat, short circuits, DC limit, and soft start, Output Relay-Zero Current Switch, Intellectual Clip Limiter |
Freq. Resp (+0/-0.31W/8Ω) |
20Hz-20KHz (+0/-0.5dB) |
Crosstalk |
>70dB |
Gross Weight |
33KG |
Dimension(in cm) |
66.2*59.2*19.3 |
USP:
·
Product tested and approved by qualified
acoustics engineer on well-equipped testing equipment on different stages and
time.
·
Product is subjected to complete load test for 8
hours (SOAK TEST) for its maximum load for product durability.
·
Inbuilt extensive protection features such as
Overheat short currents, DC protection, zero current, clip limiter, & soft
start.
·
Fast Recovery circuitry reduces distortion at
the edge of clipping and beyond.
·
Best quality Lead free solder used for strong
connection between joints.
·
Option for Stereo, parallel, bridged-mono mode
selection
·
Internal heat sinks with forced air cooling for
rapid, heat dissipation
·
Can endure 8ohm, 4ohm and 2ohm loads
·
Best components of world leading companies in
component manufacturing for give a reliable life to the amplifier and a
non-hazardous confidence in use.
Operation Manual