Description
Power Amplifier - 5C-CA-6000
·
Stereo Mode
v Respectively
connect the left & right signal source with CH1 and CH2. The output
terminals respectively connect with a speaker.
·
Parallel Mode
v Respectively
connect speaker with output terminal of each channel. The output volume of each
channel is controlled by the volume knob at the front panel.
·
Bridge Mode
v Connect the
positive terminal of both channels to speakers. The output volume is controlled
by CH1/CH3 volume knob at the front panel.
·
LED display
·
Thermal protection for overheat overload, short circuit, dc, soft
start
·
Ready situation, signal indication, clip indication
·
Gain control channel 1, channel 2
·
Balance XLR input CH1,CH2, input connection
Technical
Specifications:
8 ohm
stereo power |
1400Wx2 |
4 ohm
stereo power |
2100Wx2 |
2 ohm
stereo power |
2800Wx2 |
8 ohm
bridge power |
4200W |
4 ohm
bridge power |
5600W |
Frequency
Response |
20Hz-20KHz±0.3dB |
THD+N |
<0.05%@8Ω
1KHz |
S/N Ratio |
>103dB |
Slew Ratio |
35V/μS |
Damping
Factor |
>800 |
Crosstalk |
>70dB@8Ω
1KHz |
Input
Sensitivity |
1.4V |
Input
impedance(balance/unbalance) |
10KΩ/20KΩ |
Voltage
gain(sensitivity:8ohm) |
38dB |
Output
Circuitry |
Class H |
Cooling |
Air flow
from front to rear |
Protection |
Soft
Start, Dc, Short Circuit, Over Load, Clip Limit, Over Heat, Progressive
Volume |
G.W(±5KG) |
44KG |
Power cord |
BS 1363
Standard AC110V/60HZ.±10%
AC120V/60HZ.±10% |
USP:
·
High performance
·
Three modes of operation for ease of installation according to the
need of event.
·
Best suitable for live stage/DJ/studio/auditorium/worship.
·
Thermal protection for overheat overload, short circuit, dc, soft
start
Operation Manual